|
A Simple Home-Made
Portable Wax Bench |
|
||
|
|
|
|
|
|
The tip and tail supports are screwed onto the base board, which
is a piece of 1”x10”x4’ or scrap plywood – choose the base board length so
that the bench fits in the back of your car. |
|
||
|
|
|||
|
The board
clamps on to a work table. The tip
and tail supports should be sufficiently higher than the binding pin to allow
for the natural camber of the ski – the ski should sit snuggly on the bench. |
|
||
|
A long nail serves as the binding attachment – the bindings just
clip on. |
|
|
|
|
|
|
|
|
|
Updated 11/18/06 |
|
||
|
|||
.
.